Primary Source Recovery; Primary Source; Secondary Source; Power Control - Samsung UD46E-A User Manual

Primary Source Recovery

Select whether to restore the selected primary input source when a primary input source is connected.
― The
Primary Source Recovery function is disabled if

Primary Source

Primary Source
Specify for the automatic input source.

Secondary Source

Secondary Source
Specify for the automatic input source.

Power Control

MENU m → System → Power Control → ENTER E

Auto Power On

This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is
not needed.
Off On
• /

PC Module Power

The PC module can be turned on/off separately from the LFD.
Synced Power-On
To turn off the LFD without turning off the PC module, select Off.
Off / On
•
Primary Source is set to All.
Synced Power-Off
To turn on the PC module without turning on the LFD, select Off.
Off / On
•

Standby Control

You can set the screen standby mode to be applied when an input signal is received.
Auto
•
Power-saving mode will activate if no input signals are detected even though a source device is
connected to the display.
The message No Signal will appear if no source device is connected.
Off
•
The message No Signal will appear if no input signals are detected.
― If
No Signal is displayed although a source device is connected, check the cable connection.
― If
No Signal Message is set to Off, the
If this is the case, set No Signal Message
On
•
Power-saving mode will activate if no input signals are detected.

Network Standby

This feature keeps the network power on when the product turns off.
Off On
• /

Power Button

The power button can be set to either turn on the power or turn on/off the power.
Power On Only: Set the power button to turn on the power.
•
Power On/Off: Set the power button to turn on/off the power.
•
No Signal message does not appear.
to On.
68