Samsung UD46E-A User Manual page 77

Screen issue
The brightness and color do not look normal.
Broken lines are displayed on the edges of the screen.
Lines (red, green or blue) are displayed on the screen.
The display looks unstable and then freezes.
The screen cannot be displayed in full screen.
Go to Picture and adjust the screen settings such as
Go to System and adjust the Energy Saving
Reset the screen settings to the default settings.
Picture Size Screen Fit, change the setting to 16:9.
If is set to
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a
Samsung Service Center to resolve the issue.
The screen may freeze when a resolution other than the recommended resolution is used or if the
signal is not stable. To resolve the issue, change the PC resolution to the recommended resolution.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and bottom of
the screen.
Change the screen size setting to full screen on the product or source device.
Picture Mode, Color, Brightness and Sharpness.
settings.
77