Replacing Bulbs For Front Lamps - Mercedes-Benz 2008 CLS 550 Operator's Manual

2008 cls-class
Table of Contents

Advertisement

Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:
Additional turn signals in the exterior
rear view mirrors
High mounted brake lamp
Bi-Xenon* lamps
Front fog lamps
Front side marker lamps
Parking and standing lamps (vehicles
with Bi-Xenon* headlamps only)
Rear lamps (except license plate
lamps)
!
Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by an autho-
rized Mercedes-Benz Center.

Replacing bulbs for front lamps

1 Housing cover for low beam halogen or
Bi-Xenon* headlamp
2 Housing cover for high beam head-
lamp/high beam flasher bulb and for
parking and standing lamp bulb
Warning!
Do not remove the cover 1 for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon* lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
3 Bulb socket for turn signal lamp bulb
4 Bulb holder of high beam bulb
5 Bulb socket for parking and standing
lamp bulb
6 Bulb holder of low beam bulb
Before you start to replace a bulb for a
front lamp, do the following first:
G
Turn the exterior lamp switch to
position M ( page 126).
Open the hood ( page 286) (except
for side marker lamps).
Practical hints
Replacing bulbs
407

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 cls-class2008 cls 63 amgCls-class 2008Cls 63 amg 2008Cls 550 2008

Table of Contents