Table of Contents
Advertisement
Warning!
Never ride in a moving vehicle with the seat
backrest in an excessively reclined position
as this can be dangerous. You could slide
under the seat belt in a collision. If you slide
under it, the belt would apply force at the
abdomen or neck. That could cause serious
or even fatal injuries. The seat backrest and
seat belts provide the best restraint when
the wearer is in a position that is as upright
as possible and the seat belts are properly
positioned on the body.
Warning!
Read and observe the additional warning
notices printed in the "Safety and security"
section ( page 76).
G
G
1 Belt outlet
2 Latch plate
3 Release button
4 Buckle
Getting started
With a smooth motion, pull the belt
from belt outlet 1.
Place the shoulder portion of the belt
across the top of your shoulder and the
lap portion across your hips.
Push latch plate 2 into buckle 4 until
it clicks.
If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
Driving
49
Advertisement
Table of Contents
