Table of Contents
Advertisement
Safety and Security
Occupant safety
When the child restraint is not in use,
remove it from the vehicle or secure it with
the seat belt to prevent the child restraint
from becoming a projectile in the event of
an accident.
Do not leave children unattended in the
vehicle, even if the children are secured in a
child restraint system. Unsupervised
children in a child restraint system may use
vehicle equipment and may cause an
accident and/or serious personal injury.
Installation of infant and child restraint
systems
The CLK coupe is equipped with tether
anchorages for a top tether strap at each
of the rear seating positions.
i
Your CLK cabriolet does not have and is not
required to have anchorage rings for a child
seat's top tether strap in the rear seating posi-
tions. Child seats can be used with the seat belt,
or lower anchor system and seat belt, fully in ac-
cordance with the child seat manufacturer's in-
structions.
86
1 Anchorage ring
2 Hook
Open the trunk and release the rear
seat backrest ( page 281).
Fold rear seat backrest slightly for-
ward.
Guide top tether strap between head
restraint and top of seat back.
Head restraint must be installed and
positioned such that the top tether
strap can pass freely between the head
restraint and the top of seat back.
Make sure the tether strap is not
twisted.
1 Anchorage ring
2 Hook
Fold up anchorage ring 1.
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 1.
i
For safety, make sure the hook 2 has at-
tached to the anchorage ring 1 beyond the
safety catch, as illustrated.
Swing rear seat backrest to the rear un-
til it engages.
Check the rear seat backrest to be
locked in its upright position
( page 282).
Advertisement
Table of Contents
