Table of Contents
Advertisement
Practical hints
What to do if ...?
Vehicle status messages in the
multifunction display
Warning and malfunction messages
appear in the multifunction display located
in the instrument cluster.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in
this Operator's Manual.
Selecting the vehicle status message
memory menu in the control system
( page 154) displays both cleared and
uncleared messages.
High-priority messages appear in the
multifunction display in red color.
392
Certain messages of high priority cannot
be cleared from the multifunction display
using the reset button ( page 138) or but-
ton k, j, è, or ÿ on the
steering wheel.
Other messages of high priority and
messages of less immediate priority can
be cleared from the multifunction display
using the reset button ( page 138) or
button k, j, è, or ÿ on the
steering wheel. They are then stored in the
vehicle status message memory
( page 154). Remember that clearing a
message will only make the message dis-
appear. Clearing a message will not cor-
rect the condition that caused the
message to appear.
Warning!
All categories of messages contain
important information which should be
taken note of and, where a malfunction is
indicated, addressed as soon as possible at
an authorized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property
damage or personal injury.
G
Advertisement
Table of Contents
