Table of Contents
Advertisement
Controls in detail
Soft top (Cabriolet)
6 Retaining lugs
7 Mounting fixture on right side
8 Catch
9 Locking
10 Unlocking
Fold retaining lugs 6 out.
Slide pre-assembled wind screen into
mounting fixture on right side 7 using
retaining pin on right side. Simulta-
neously, retaining lugs 6 should slide
into seat belt passage in rear bench
seat.
266
Pull catch 8 in position 9 and guide
left retaining pin into mounting fixture
on left side.
Fold upper section of wind screen up
toward head restraints until it stops.
Warning!
Check for secure locking by pulling up on
the wind screen.
To prevent personal injury, remove wind
screen if rear seats are to be occupied by
passengers.
Removing
Fold upper section of wind screen back
down.
Pull catch 8 in position 10 and pull
wind screen out toward front of vehi-
cle. Be careful not to damage interior
G
trim with guide tabs.
Fold retaining lugs 6 back.
b Catch
Press catch b to the right and fold up-
per and lower sections back.
Place the wind screen back into the
bag.
Advertisement
Table of Contents
