Manual Shift Program Clk 63 Amg - Mercedes-Benz 2008 CLK-Class Operator's Manual

2008 clk-class
Table of Contents

Advertisement

Controls in detail
Automatic transmission
Shifting into optimal gear range
Pull and hold left shift paddle 1.
The transmission will automatically
select the gear range suited for optimal
acceleration and deceleration. This will
involve shifting down one or more
gears.
182

Manual shift program CLK 63 AMG

In addition to the automatic shift
program C or S, your vehicle is equipped
with the manual shift program M.
In the manual program mode M,
system-controlled automatic gearshifting
is switched off and you need to change the
gears by manually upshifting or downshift-
ing using the steering wheel gearshift
paddles ( page 181) or the gear selector
lever.
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Avoid spinning of a drive wheel when driving off
on slippery road surfaces. This may cause seri-
ous damage to the drivetrain which is not cov-
ered by the Mercedes-Benz Limited Warranty.
The program mode selector switch is
located on the lower part of the center
console.
Program mode selector switch
M Manual
For manual gear shifting
C Comfort
For standard driving
S Sport
For sporty driving

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 clk3502008 clk5502008 clk63 amgClk 350Clk 550Clk 63 amg ... Show all

Table of Contents