Table of Contents
Advertisement
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
position M ( page 129).
Open the hood ( page 323).
Front lamps halogen-type
1 Housing cover for low beam headlamp
2 Housing cover for high beam head-
lamp, parking and standing lamp
446
3 Bulb socket for turn signal lamp bulb
4 Bulb holder of low beam bulb
5 Bulb holder of high beam bulb
6 Bulb socket for parking and standing
lamp bulb
Low beam bulb
Turn housing cover 1 counterclock-
wise and remove it.
Turn bulb holder 4 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 4.
Insert the new bulb so that its socket
locates in the recess of bulb holder 4
and is level to it.
Reinsert bulb holder 4 with the bulb in
the lamp and turn clockwise.
Align housing cover 1 and turn it
clockwise.
High beam bulb
Turn housing cover 2 counterclock-
wise and remove it.
Turn bulb holder 5 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 5.
Insert the new bulb so that its socket
locates in the recess of bulb holder 5
and is level to it.
Reinsert bulb holder 5 with the bulb in
the lamp and turn clockwise.
Align housing cover 2 and turn it
clockwise.
Advertisement
Table of Contents
