Mercedes-Benz 2008 C-Class Operator's Manual page 167

Controls in detail
Control system
Resetting all settings
You can reset most of the functions of the
submenus to the factory settings.
i
For safety reasons, the following function
are not reset while driving:
the Headlamp mode function in the Light-
ing submenu
Press ( or & to select the
Settings menu.
Press % or $ to select the
function.
Factory settings
Press #.
The menu Reset to factory settings
No/Yes appears in the multifunction
display.
166
Press % or $ to select
Select Yes if you want to reset to facto-
ry settings.
Press # to confirm.
The confirmation message appears in
the multifunction display.
The functions of the submenus will re-
set to factory settings.
Submenus in the Settings menu
Press ( or & to select the
tings menu.
Press % or $ to select a sub-
menu.
Yes or No . The submenus are arranged by hierarchy.
Scroll down with %, scroll up
with $.
With the selection marker on the desired
submenu, use the # to access the indi-
vidual functions within that submenu.
Once within the submenu, you can use
the $ to move to the next function or
the % to move to the previous function
within that submenu.
The table below shows what settings can
Set-
be changed within the various submenus.
Detailed instructions on making individual
settings can be found on the following
pages.