Digitus DN-13007 User Manual page 85

3. First, run Control Center. It will automatically search for Servers on the LAN. Then
Servers' IP addresses will be shown in Control Center.
4. Run any Web browser, like Microsoft Internet Explorer. Go to "http://Server's IP
address "or "http://Server's Server Name" to access the Server's home page.
5. Click CONFIG at the top of the menu.
6. Login the Server with Administrator (default: admin) and Password (default: admin).
7. Click Maintenance.
8. Click Upgrade Firmware.
9. Click Browse button to choose the file of new firmware.
10. Click Upload button to start firmware upgrade.
11. Wait for 15 seconds for system reboot.
Procedure C: Using the Init Button and the TFTP Client
1. Plug in the power adaptor while pressing the Init button until LED indicators of
Power, USB1 and USB2 blink. (For DN-13008, only USB1 LED will blink.)
Please note that after that, the Server will operate using the factory
default values after restarting, i.e., your Server's configuration will
recover to Factory Default values.
2. Start the TFTP client Tool: Image Burner
85