Digitus DN-13007 User Manual page 75

Storage Access Mode
1. Server Mode: In this mode, you can access the USB storage via FTP or
SMB/CIFS protocols. Only FAT16/32 file format is supported in this
mode. This is the default mode.
2. NetUSB Mode: In this mode, you can access the USB storage using
NetUSB technology. In this mode, FAT16/32 and NTFS file formats are
supported, but only one user is allowed to access the storage at the
same time. Please refer to chapter 9 for the details about NetUSB
technology.
User Accounts: You can change administrator name and password or add a
user account for SMB/CIFS Print/File server and FTP File server. If you forgot
administrator name and password, you must perform Restore Factory Default
action by plugging in the power adaptor while pressing the Init button. Please
refer to the chapter "Restore Factory Defaults". Administrator owns the
Read-Write Permission for File servers.
Set Administrator
New Administrator: enter your desired administrator name.
New Password: enter your desired password.
Retype Password: confirm your previous password typing.
75