Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Digitus DN-16100-2
Summary of Contents for Digitus DN-16100-2
- Page 1 H.264 Multi-Profile 1-Channel Video Server Quick Start Guide DN-16100-2...
-
Page 2: System Requirements
About multi-profile Multi-profile stands for simultaneously video streams. These Network Cameras can generate H.264, MPEG4 and MJPEG streaming simultaneously to different clients. Moreover, the resolution can be different from one client to another. This state-of-art design is considerable to fit in various network environments. Before Installation Before installation, please be sure to read this quick installation guide and user’s manual carefully to complete machine installation. -
Page 3: Physical Installation
2. Physical Installation 2.1 Connections Front Panel LAN Socket The LAN socket is a RJ-45 connector for connections to 10Base-T or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of the network automatically. Please use Category 5 cable to connect the Video Server to a 100Mbps Fast Ethernet switch or hub. -
Page 4: Installation
Back Panel MIC in (audio in) Connect an external microphone to the Video Server. Micro SD Card Slot User can insert a micro SD card into this slot for recording. Factory Default Reset This button is hidden in the pinhole. This button is used to restore the all factory default settings. Sometimes restarting the Video Server will make the system back to a normal state. -
Page 5: Camera Administration
3. Plug an Ethernet cable into Video Server Connect an Ethernet cable to the LAN socket located on the device’s panel and attach it to the network. 4. Connect RS485 (option) When users would like to apply a camera with P/T/Z function, they usually need to connect their communication port (for camera control) through RS485. - Page 6 3C:49:37:07:01:02 View function: If IP Wizard II finds network devices, View button will be available. Please select the device you want to view and click the View button. Furthermore you could double click the left button of mouse to link to the network device by browser. 3C:49:37:07:01:02...
- Page 7 LAN setting function: The utility featured with “LAN” setting function to help user to modify the IP parameters of the installed network devices. User can step by step to setup IP address, username and password. Note 1: If no IP address is assigned within 30 seconds, the networked device will automatically assign 192.168.0.100.
- Page 8 After connected to networked device, the device will prompt for User name and Password. For the first time, please enter: “admin” as username and password: “admin” to continue Web Management. If difficulty is met, please refer to the following steps to establish the connection: The networked device must be installed and powered ON.