Digitus DN-13023 Quick Installation Manual

Multifunction USB Network Server Series
Safety Precautions
 Only use the device within the specified temperature range for: 0 ~ 40°C
 When not in use, store the product in a clean and dry place in temperatures
between 0°C and 40°C
 Do not let the indoor devices come into contact with liquids
 Ensure that the indoor devices are only used inside. These devices are not
intended for outdoor use and would be damaged
 During thunderstorms, there is a danger of lightning strike and due to overvoltage
damage to connected electrical appliances
 Do not install the product during a thunderstorm
 Disconnect the product from power source during a thunderstorm
 Keep the devices outside the reach of children, since these components can be
dangerous
 Never try to repair the device by yourself. Repair and maintenance work must be
carried out by specialists
 In case of problems contact our customer service
 Dust, humidity and vapours as well as sharp cleaning agents or solvents can
damage the product
 Disconnect the product from the power source before cleaning
 Clean the product with a slightly damp, lint-free cloth
Introduction
This document describes the steps for installing and configuring the Multifunction
USB Network Server as a USB device server in the Windows environment.
Quick Installation Guide
DN-13023