Table of Contents
Advertisement
Control systems
COMAND telephone*
i
"Save" does not function if the selected list
entry is already saved in the COMAND address
book.
Select a number category to add,
e.g. "Home".
Select a telephone category to add,
e.g. "Land Line".
Select "Save".
The search menu for COMAND address
book entries appears.
Search for desired entry.
i
There is a detailed description of searching
for an COMAND address book entry in the
"Searching for an address book entry" section
( page 204).
Press n when you have finished
searching.
COMAND saves the data if there are
fewer than four numbers assigned to
the entry you are searching for in the
selected number category.
124
If four numbers are saved for the entry
you are searching for, a prompt will ap-
pear asking whether you want to over-
write one of the existing numbers.
Select "Yes" or "No".
If you select "Yes", a selection list will
appear containing the four existing
numbers.
Select the number to be overwritten.
COMAND overwrites the selected num-
ber with the new data.
Incoming call
Rejecting or accepting the call
Rejecting: Select "Reject".
or
Press t on the telephone keypad or
on the multifunction steering wheel.
i
If you have a CDMA/TDMA mobile phone
and reject a call, only the ring tone will stop. The
call itself can only be ended by the caller.
Accepting: Select "Accept".
or
Press s on the telephone keypad or
on the multifunction steering wheel.
or
Press 0 on the multifunction steer-
ing wheel.
Use the mobile phone (see mobile
phone operating instructions).
or
Use the Bluetooth headset
(see headset operating instructions).
i
The use of a Bluetooth headset requires
Bluetooth to be activated and the Bluetooth
headset to be authorized ( page 217).
If you have accepted the call using
COMAND, the telephone keypad, the mul-
tifunction steering wheel or the mobile
phone, the call will be conducted via the
hands-free system. The volume of the call
can be adjusted ( page 89).
Advertisement
Table of Contents
