Table of Contents
Advertisement
Control systems
COMAND system settings
Canceling during the first or second part
of individualization
Select "Cancel".
A prompt appears asking whether you
really do want to cancel.
Select "Yes" or "No".
If you select "Yes", individualization will
be canceled. The data from the part at
which you exited is not saved.
If you select "No", the part at which you
stopped begins again.
Deleting existing individualization data
Select "Vehicle"
"System Settings"
"Voice Control"
"Delete individu-
alization".
A prompt appears asking whether you
really do want to delete.
Select "Yes" or "No".
The individualization data will either be
deleted or not, depending on your se-
lection.
216
Setting the system language
Select "Vehicle"
"System Settings"
"Language".
The language list appears. A dot R in-
dicates the current setting.
Changing setting: Select desired lan-
guage.
The language is set.
Assigning the favorite button
1 Favorite button
You can assign the following predefined
functions to the favorite button P:
"Rear Window Sunshade"
You can use the favorite button to ex-
tend or retract the rear window sun-
shade. This is the default setting.
"Display OFF"
You can use the favorite button to
switch the COMAND display on or off.
"Tow-away Alarm"
You can use the favorite button to acti-
vate or deactivate the tow-away
alarm*.
"Repeat Navigation Command"
You can use the favorite button to re-
call the last command issued by the
navigation system.
Select "Vehicle"
"System Settings"
"Favorite".
The list of predefined functions appears.
The dot R in front of the list entry indi-
cates the current setting.
Advertisement
Table of Contents
