Table of Contents
Advertisement
Adjusting balance or fader
Balance is used to determine whether the
sound focus should be shifted toward the
driver's side or the passenger's side.
Fader is used to determine whether the
sound focus should be shifted toward the
front or rear of the vehicle
Select "Sound"
"Balance/Fader".
The setting last selected is indicated by
an outlined bar.
Adjusting balance and fader
1 Current setting indicated by orange
cross-hair symbol
Changing setting: Slide
until desired balance/fader setting is
reached.
Exiting menu: Press n or L.
The setting is saved.
Surround sound
With surround sound, you can choose be-
®
tween "LOGIC7
ON" and "LOGIC7
®
Harman/kardon LOGIC7
surround sound
is available for the following operating
modes:
Audio DVD (MLP, DTS, PCM, and Dolby
Digital audio formats)
Audio CD
MP3
Radio (FM, AM, WB,
Satellite* (USA only))
PCMCIA
rmq
omp
or
i
Since some DVDs contain both stereo as
well as multi-channel audio formats, it may be
necessary to adapt the audio format
( page 114).
i
The "LOGIC7
man/kardon LOGIC7
makes it possible to play discrete 5.1 and stereo
recordings with optimal surround sound for ev-
ery passenger. Music on CDs or audio DVDs with
high-resolution surround formats such as MLP,
®
OFF".
DTS or Dolby Digital is played back optimally.
For an ideal sound experience on all seats,
®
LOGIC7
distributes 5.1 surround information
via the 13-channel system architecture. The re-
sult is a sound as intended by the sound engi-
neers during the original recording.
harman/kardon LOGIC7
nel stereo sound material into multi-channel sur-
round sound. With the help of LOGIC7
surround information stored during the original
recording are read out and distributed through
the 13 channels. No effects are created during
this process; only that which was already there
becomes audible.
In addition, harman/kardon LOGIC7
perceived sound source away from the individual
loudspeakers, thus generating a natural 360°
sound experience for every passenger.
Control systems
COMAND introduction
®
ON" function of the har-
®
surround sound system
®
converts all two-chan-
®
,
®
moves the
91
Advertisement
Table of Contents
