Table of Contents
Advertisement
Controls in detail
Fastening the seat belts
Warning!
Never ride in a moving vehicle with the seat
backrest in an excessively reclined position
as this can be dangerous. You could slide
under the seat belt in a collision. If you slide
under it, the belt would apply force at the ab-
domen or neck. That could cause serious or
even fatal injuries. The seat backrest and
seat belt provide the best restraint when the
wearer is in a nearly upright position and the
belt is properly positioned on the body.
Warning!
Read and observe the additional warning no-
tices printed in the "Safety and Security"
section ( page 44).
340
G
G
1 Belt outlet
2 Latch plate
3 Buckle
4 Release button
Pull the seat belt smoothly from the
seat belt outlet 1.
Place the shoulder portion of the belt
across the top of your shoulder and the
lap portion across your hips.
Push latch plate 2 into buckle 3 until
it clicks.
If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
To release the seat belt, press release
button 4 and guide latch plate back to
belt outlet.
Advertisement
Table of Contents
