Control systems
COMAND telephone*
Adding to an existing entry in the
COMAND address book
omp
ymz
Slide
or rotate
list entry ( page 128).
Select "Options"
"Save"
i
"Save" does not function if the selected list
entry is already saved in the COMAND address
book.
Select a number category to add,
e.g. "Home".
Select a telephone category to add,
e.g. "Land Line".
Select "Save".
The search menu for COMAND address
book entries appears.
Search for desired entry.
i
There is a detailed description of searching
for an COMAND address book entry in the
"Searching for an address book entry" section
( page 217).
Press n when you have finished
searching.
130
COMAND saves the data if there are
fewer than four numbers assigned to
the entry you are searching for in the
and select
selected number category.
If four numbers are saved for the entry
"Add".
you are searching for, a prompt will ap-
pear asking whether you want to over-
write one of the existing numbers.
Select "Yes" or "No".
If you select "Yes", a selection list will
appear containing the four existing
numbers.
Select the number to be overwritten.
COMAND overwrites the selected num-
ber with the new data.
Incoming call
Rejecting or accepting the call
Rejecting: Select "Reject".
or
Press t on the telephone keypad or
on the multifunction steering wheel.
i
If you have a CDMA/TDMA mobile phone
and reject a call, only the ring tone will stop. The
call itself can only be ended by the caller.
Accepting: Select "Accept".
or
Press s on the telephone keypad or
on the multifunction steering wheel.
or
Press ! on the multifunction steer-
ing wheel.
Use the mobile phone (see mobile
phone operating instructions).
or