Operation - AT&T Call Display 436 User Manual

Operation

Reviewing Call History
The screen displays the call information for about 30 seconds after it has
been received.
1
To review earlier calls, press -.
2
To advance through call history from an earlier call, press +. The
screen displays END OF LIST to indicate you have reviewed all the
calls in the call history. When you reach the end of the call history,
it begins again.
Removing Call Records from History
When the unit is idle, press r to erase a displayed call record. The
screen displays Call Removed. To remove all calls from call history, press
r when no call is displayed. The screen displays REMOVE All?.
Press r again.
NOTE: Once a call is removed from call history, it cannot be retrieved.
Call Waiting
Press Con the unit when you receive a call waiting signal.
Using this button puts your current call on "hold," connects you to the
new call, and displays the name/number of the call waiting call on the
bottom two lines.
Press Cagain to return to the first call. Use Cinstead of
using the switchhook or Flash button on your phone.
8