Advertisement
The device bay of the MIC-3021/8 accepts up to four devices. Howev-
er, the actual available space depends on the system configuration.
The device bay of the MIC-3021/8 can be separated into six segments.
The space on top is designed to accommodate one 3.5" floppy disk,
the middle three space are for three 5.25" drives, and the bottom two
space are reserved for power supplies. Please see Figure 2-4 for
recommended configuration illustration.
There are three types of mounting brackets shipped with the MIC-
3021/8. One pair of mounting brackets are designed for mounting a
3.5" floppy disk drive. Please refer to Figure 2-5 for an illustration of
mounting. Three pairs of mounting brackets are designed for mount-
ing 5.25" devices such as hard disk drives or CD-ROM drives. Please
refer to Figure 2-6 for an illustration of mounting. However, if users
would like to install a 3.5" hard disk drive extension brackets (3.5" to
5.25") are required. These extension brackets are available in PC
shops, or users can contact an Advantech distributor to order them.
An additional pair of mounting brackets are included in the MIC-3021/
8's package. This pair of mounting brackets are reserved for drives
installed at the bottom space next to the fan tray. Please refer to Figure
2-7 for an illustration.
Advertisement
