Download
Share
Print this page
Advantech MIC-3039 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Enclosure
  5. MIC-3039
  6. User manual
Advantech MIC-3039 User Manual

Advantech MIC-3039 User Manual

1u high 2-slot compactpci enclosure with rear i/o support
Hide thumbs

Advertisement

Quick Links

Download this manual

Advertisement

loading

Related Manuals for Advantech MIC-3039

Summary of Contents for Advantech MIC-3039

  • Page 2: Specifications

    All other product names or trademarks are properties of their respective owners. The MIC-3039, developed by Advantech Co., Ltd., has passed the CE test for environment specifications when shielded cables are used for external wiring. We recommend the use of shielded cables.
  • Page 4 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 5 • This user's manual If any of these items are missing or damaged, contact your distributor or sales representative immediately. If you have any technical questions about the MIC-3039 or any other Advantech products, please visit our support website at: • http://www.advantech.com.tw/support...

  • Page 6: Table Of Contents

    1.4 Dimensions .................. 5 1.5 Ordering Information ..............5 2. Installation ............. 7 2.1 Initial Inspection ................8 2.2 The MIC-3039 Illustration ............9 2.3 Installation Procedures ............. 10 2.3.1 Card Installation and Removal ........... 10 2.3.2 Before Operating the System ............ 12 3.
  • Page 7 A. Pin Assignments ........21 A.1 System Slot P1 Connector ............22 A.2 System Slot P2 Connector ............23 A.3 System Slot P3 Connector ............24 A.4 System Slot P4 Connector ............25 A.5 System Slot P5 Connector ............26 A.6 Peripheral Slot P1 Connector ...........
  • Page 8 Figures...
  • Page 9 Tables...
  • Page 11 (such as Advantech's MIC-3357 or MIC-3377/M) and one single-slot peripheral board, or one two-slot CPU board merely. The MIC-3039 supports IEEE 1101.11 rear I/O transition boards. Users can route I/O signals to the rear transition boards for simplified system cabling. Front boards pop in and out without the need to do any hardwiring.

  • Page 12: Fans

    • Construction: Aluminum frame and galvanized sheet steel • 2-slot space (8 TE), including one system slot and one peripleral slot • "Hot swappable” platform complies with PICMG 2.1 R 1.0 Hot Swap Specification • Dimensions (W x H x D, mounting flanges not included): 440 x 44 x 280 mm (17.3"...
  • Page 13 • Input: 100 ~ 240 V @ 50 ~ 60 Hz, switchable • PFC (Power Factor Correction) can reach the furget of 95% @ 115 V, full load, following the standard of IEC 1000-3-2 • Output: +3.3 V @ 14 A, +5 V @ 16 A, +12 V @ 9 A, -12 V @ 0.7 A •...

  • Page 14: Power Supply

    • MIC-3039: 1U-high CompactPCI enclosure with 2- slot backplane, cooling fans and power supply. ® • MIC-3377/M: Single-slot 6U CompactPCI Pentium III processor board with VGA and dual LANs ® • MIC-3357: Single-slot 6U CompactPCI Pentium MMX processor board with VGA and triple LANs •...
  • Page 17 It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the MIC-3039, check it for signs of shipping damage (damaged box, scratches, dents, etc.). If it is damaged or fails to meet specifications, notify our service department or your local representa- tive immediately.
  • Page 18 The MIC-3039 is designed to be installed and maintained easily. Figure 2-1 and Figure 2-2 illustrate important components on the front and rear side of the enclosure.
  • Page 19 The CompactPCI connectors are firm and rigid, and require careful handling while plugging and unplugging. Improper installation of a card can easily damage the backplane of the chassis. The system card can be installed only in the system slot. The CompactPCI specification allows the system slot to be in any position in the backplane.
  • Page 20 5. Left-pull the right handle and right-pull the left handle to push the card into place. 6. Screw the card if necessary...
  • Page 21 3. Push the both handles out to release the card from the backplane. 4. Slide the card out. Before operating your system, first check your power supply source. The power supply module included in the MIC-3039 chassis accepts a full input range of 100 ~ 240 V without any switch setting.
  • Page 23 In addition, the MIC-3039 includes one standard ATX power connec- tor to accpet one ATX power supply. The MIC-3039 complies with PICMG 2.1 Hot-Swap Specification, providing full hot-swapping capability.

  • Page 24: Dimensions

    • Two CompactPCI slots (one system slot and one peripheral slot) • Bus width: 64-bit • 8-layer PCB, 3.0 mm thick • Power connector: One ATX power connector for connecting standard ATX power supply • Complies with CompactPCI Specification PICMG 2.0, Ver.3.0 •...
  • Page 25 The CompactPCI specification defines slot numbering seperating for physical and logical slots. Each slot has a physical number and a logical number (refer to the CompactPCI specification version 2.0 R 3.0 for further information on slot assignments). The physical numbers are printed on the backplane, enclosed in circles or triangles, below each slot.
  • Page 27 The backplane provides connectors and jumpers for users to configure the backplane for specific application. Table 3-2 gives a brief descrip- tion to each connector on the backplane. Figure 3-2 and Figure 3-3 illustrate the connector locations of the backplane.
  • Page 28 This connector accepts one standard ATX power supply. The 30-pin connector CN1 is an interface for an optional external monitoring and alarm module which monitors the conditions of the system. This alarm module will be available in August 2001. For more information about it , please contact with our local sales representives or visit our website.

  • Page 29: Installation

    Along the upper and lower edges of the backplane are 4 power pads providing external power supply I/O. These 4 pads facilitate input or output of powers and grounds. Contact Advantech for installation help. The backplane is configured to comply with the clock routing specified in the CompactPCI Hot Swap Specification, PICMG 2.1, version 1.0.
  • Page 31 = long pins = short pins = medium length pins #: Low active...
  • Page 32 #: Low active Note: GA[4...0] shall be used for geographic addressing on the backplane...
  • Page 36 = long pins = short pins = medium length pins #: Low active...
  • Page 37 #: Low active Note: GA[4...0] shall be used for geographic addressing on the backplane...