Making An Outgoing Call - Mercedes-Benz 2007 CL 550 Operator's Manual

®
Use the Bluetooth headset
(see headset operating instructions).
i
®
The use of a Bluetooth headset requires
®
Bluetooth to be activated and the Bluetooth
headset to be authorized ( page 232).
If you have accepted the call using
COMAND, the telephone keypad, the mul-
tifunction steering wheel or the mobile
phone, the call will be conducted via the
hands-free system. The volume of the call
can be adjusted ( page 91).
If you have accepted the call using the
®
Bluetooth headset, the call will be con-
ducted via the headset.
Further operating functions can be found
in the "Functions during a single-call con-
nection" section ( page 133).
You can also accept a call if the
COMAND display is showing a screen oth-
er than the telephone mode screen. After
accepting the call, you will see the caller's
data in a window.
qmr
Closing window: Slide
or press n.

Making an outgoing call

i
If you place an outgoing call and receive a
busy signal, the telephone automatically starts
®
to redial as long as the provider and the mobile
phone support this function (see mobile phone
operating instructions).
While the call is connecting, you can also send
character strings ( page 134).
Entering the telephone number using
the COMAND controller
Switching screen to telephone
mode: Call up main telephone menu
( page 127).
Entering digits: Select desired digits
ymz
by rotating
press n.
Deleting individual digits: Select )
and briefly press n.
Deleting an entire telephone num-
ber: Select ) and press and hold n
until the telephone number is deleted.
omp
or
Connecting a call: Select "S".
Entering a telephone number using the
telephone keypad
Switching screen to telephone
mode: Call up main telephone menu
( page 127).
Use telephone keypad to enter digits.
i
using the telephone keypad can be found on
( page 84).
Connecting a call: Press s.
omp
or sliding and
Control systems
COMAND telephone*
A detailed description of how to enter digits
131