Detour function
i
The detour function blocks a section of the
route ahead of you. You can set the length of the
blockage. If possible, COMAND calculates a de-
tour route.
i
The detour function may direct you to
off-road routes. See Off-road and Off-map for ad-
ditional routes and cautions ( page 200).
Select "Route"
"Detour" in map view
with the menu system displayed
( page 157).
The detour function display appears.
Setting length of the blockage:
Select "More" or "Less" until the de-
sired length is set.
COMAND navigation system (during route guidance)
1 Blocked route section
2 Current vehicle position; the triangle in-
dicates the vehicle's direction of travel
3 Information about the blocked route
section
i
Blocked route section 1 is always highlight-
ed in red/white. The information about blocked
route section 3 shows which section of the
route is blocked and the length of the blocked
section.
Control systems
Starting route calculation:
Select "Start", see also ( page 181).
Deleting blockage: Select "Navi"
"Route"
"Detour"
"Delete".
Select "Back".
205