Entering A Poi From The Map - Mercedes-Benz 2007 CL 550 Operator's Manual

Entering a POI from the map

i
If the crosshair is shown on the map, you
can enter POIs in the vicinity of the crosshair.
If the crosshair is not shown on the map, you can
enter POIs in the vicinity of the vehicle's current
position.
Select "Guide" in the map view with the
menu system displayed ( page 157).
You will see POI symbols on the map,
depending on whether POIs are avail-
able and which map scale is set.
The scale at which the symbols are dis-
played on the map varies according to
the symbol.
You can set which symbols COMAND
should display ( page 159).
The POI closest to the center of the
screen is automatically marked.
If there are no POIs available, the
"Back" menu item is automatically
highlighted and you cannot select oth-
er menu items.
COMAND navigation system (Point of interest entry)
1 Highlighted POI
2 Information about the highlighted POI
Selecting a POI: Select "Next" or "Pre-
vious".
The next or the previous POI is marked.
Control systems
Displaying details of the selection:
Select "Details".
Starting route calculation:
Select "Start", see also ( page 181).
A prompt appears asking whether the
POI should be used as the destination.
Select "Yes" or "No".
If you select "Yes", the route calcula-
tion begins. If you select "No", you can
select a new POI.
195