Table of Contents
Advertisement
Getting started
Driving
Starting with the SmartKey
For information on turning off the engine
with the SmartKey, see "Turning off en-
gine" ( page 60).
Make sure the gear selector lever is set
to P.
Do not depress the accelerator.
Turn the SmartKey in the starter switch
to position 3 and hold until the engine
starts ( page 36).
i
You can also use the "touch-start"
function. Turn the SmartKey to
position 3 and release it again immedi-
ately. The engine then starts automati-
cally.
50
Starting with KEYLESS-GO*
Warning!
As long as the SmartKey with KEYLESS-GO
is in your vehicle, the vehicle can be started.
Therefore, never leave children unattended
in the vehicle, as they could otherwise acci-
dentally start the engine.
When leaving the vehicle, always take the
SmartKey with KEYLESS-GO with you and
lock the vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle.
You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button on the
gear selector lever.
For information on turning off the engine
with KEYLESS-GO, see "Locking with
KEYLESS-GO*" ( page 62).
The SmartKey with KEYLESS-GO must be
located in the vehicle.
G
KEYLESS-GO start/stop button
1 USA only
2 Canada only
Make sure the gear selector lever is set
to P.
Depress the brake pedal during the
starting procedure. Do not depress
accelerator.
The selector lever lock is released.
Press KEYLESS-GO start/stop
button 1 once.
The engine starts if the SmartKey with
KEYLESS-GO is in the vehicle.
Advertisement
Table of Contents
