Mercedes-Benz 2006 CLS 500 Operator's Manual page 163

Controls in detail
Control system
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date
menu to change the time and date display
settings. The following functions are avail-
able:
Function
Synchronizing the time
Set time (hours)
Set time (minutes)
Set date (month)
Set date (day)
Set date (year)
i
Information on setting the time, refer to
separate COMAND instructions.
162
Synchronizing the time
This function can only be seen on vehicles
sub- with COMAND and navigation module*.
Move the selection marker with the
æ or ç button to the
submenu.
Page
Press button j or k repeatedly
until you see Time sync. with head
162
unit in the multifunction display.
162
The selection marker is on the current
163
setting.
163
163
164
Press button æ or ç to select
the desired setting.
Set time (hours)
This function can only be seen when time
synchronization is switched off.
Move the selection marker with the
æ or ç button to the
Time/Date
submenu.
Press button j or k repeatedly
until you see
multifunction display.
The selection marker is on the hour set-
ting.
Press button æ or ç to set the
hour.
Confirm by pressing reset button
( page 24).
Time/Date
Clock, hours in the