Mercedes-Benz 2006 CLS 500 Operator's Manual page 384

Cls-class
Table of Contents

Advertisement

Display symbol
Display messages
:
Engine oil level
Visit workshop
Change engine oil
Visit workshop
Oil sensor malfunction
Visit workshop
When the
Engine oil - Visit workshop
message appears while the engine is run-
ning and at operating temperature, the en-
gine oil level has dropped to approximately
the minimum level.
When this occurs, the warning will first
come on intermittently and then stay on if
the oil level drops further.
Possible cause/consequence
The engine oil has dropped to a critical
level.
It may be that there is water in the engine
oil.
The measuring system is malfunctioning.
If no oil leaks are noted, continue to drive
to the nearest service station where the
engine oil should be topped to the required
level with an approved oil specified in the
Factory Approved Service Products pam-
phlet.
Practical hints
What to do if ...
Possible solution
Check the engine oil level
( page 295) and add oil as required
( page 296).
If you must add engine oil frequently,
have the engine checked for possible
leaks.
Have the engine oil checked.
Have the measuring system checked
by an authorized Mercedes-Benz
Center.
!
The engine oil level warnings should
not be ignored. Extended driving with
the symbol displayed could result in
serious engine damage that is not
covered by the Mercedes-Benz Limited
Warranty.
383

Advertisement

Table of Contents
loading

Table of Contents