Table of Contents
Advertisement
Practical hints
What to do if ...
Display messages
Please note:
Conven. functions
available again
Run Flat Indicator
inactive
Check tires
Then reactivate
Run Flat Indicator
Run Flat Indicator
unavailable
Tire pressure
Check tires
370
Possible cause/consequence
On-board voltage is sufficient; the
consumers will switch on again.
Run Flat Indicator* is
malfunctioning.
There was a warning message about
a loss in the tire inflation pressure
and the Run Flat Indicator* has not
been reactivated yet.
The Run Flat Indicator* has been
switched off due to an error.
The Run Flat Indicator* indicates
that the pressure is too low in one or
more tires.
Possible solution
Have the Run Flat Indicator* checked by an
authorized Mercedes-Benz Center.
Make sure that the correct tire inflation pres-
sure is set for each tire.
Then reactivate the Run Flat Indicator*.
Have the Run Flat Indicator* checked by an
authorized Mercedes-Benz Center.
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers. Ob-
serve the traffic situation around you.
Check and adjust tire inflation pressure as
required ( page 313).
If necessary, change the wheel ( page 423).
Reactivate the Run Flat Indicator* after adjust-
ing the tire inflation pressure values
( page 315).
Advertisement
Table of Contents
