Rand McNally TripMaker RVND 5510 User Manual
  1. Manuals
  2. Brands
  3. Rand McNally Manuals
  4. GPS
  5. TripMaker RVND 5510
  6. User manual

Rand McNally TripMaker RVND 5510 User Manual

Hide thumbs Also See for TripMaker RVND 5510:
Table of Contents

Advertisement

Quick Links

User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TripMaker RVND 5510 and is the answer not in the manual?

Questions and answers

Related Manuals for Rand McNally TripMaker RVND 5510

Summary of Contents for Rand McNally TripMaker RVND 5510

  • Page 1 User’s Guide...

  • Page 2: Trademarks

    Neither this manual nor any parts thereof may be reproduced for any purpose whatsoever without the express written consent of RM Acquisition, LLC. d/b/a Rand McNally, Inc, nor may it be transmitted in any form either electronically or mechanically, including photocopying and recording. All technical specifications, drawings, etc.

  • Page 3: Fcc Notice

    • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet that is on a different circuit from the GPS unit. • Consult the dealer or an experienced radio/TV technician for help. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 4: Table Of Contents

    ...........15 Using Keyboards ............16 Welcome Special Keys .............16 Your TripMaker RVND 7710 ........1 Routing Messages ............17 Your TripMaker RVND 5510 ........2 Basic Settings ..............18 About GPS ..............3 Select a Language ..........18 Customer Support ............4 Select a Keyboard Type ........18 Volume Settings ............19...
  • Page 5 Tap on the Map and Detour Around a Route Select and Filter Travel Center Amenities ..64 Segment ..............43 Select a Rand McNally Editor’s Pick ....65 Cancel a Route ............44 Select a Consumer Point of Interest By Category ...67 Using Predictive Traffic (select Units) ......45 Select a Consumer Point of Interest by Name ..68...
  • Page 6 Remove a Stop from a Multi-Stop Route ....94 Rand McNally Trips Window ........76 Select and Run a Saved Route ........95 © Select a Rand McNally Best of the Road Route ..77 Delete a Multi-Stop Route ........96 Select a Rand McNally Weekend Getaway ....78 Optimize Routes ............97...
  • Page 7 Delete a Maintenance Note .........115 Rand McNally Dock Trails ................116 Download and Install ..........137 Create a New Trail ..........116 Rand McNally Dock Main Window ....138 Rename an Existing Trail ........117 Go to Rand McNally Website ........139 Delete a Trail ............118 Updates ...............140 Display a Trail ............119...

  • Page 8: Welcome

    Micro SD Card Slot For future use. Mini-USB Port Connects to a power source (computer, vehicle charger, or wall charger). Also used with the Rand McNally Dock application. Audio Output Socket Connect to a powered external speaker. (Not provided). Reset Button Resets and restarts the device.

  • Page 9: Your Tripmaker Rvnd 5510

    Connect to a powered external speaker. (Not provided). Micro SD Card Slot For future use. Mini-USB Port Connects to a power source (computer, vehicle charger, or wall charger). Also used with the Rand McNally Dock application. Speaker Issues spoken road instructions and maneuvers. Antenna External GPS Port Used with an optional GPS antenna in cases where clear view of the sky is blocked by metal objects or metalized windshields.

  • Page 10: About Gps

    Some vehicles may have a limited view of the sky due to metal sun shields or a metallized windshield coating. If your unit does not appear to receive signals well inside your vehicle but works well outside, contact Rand McNally for an available external antennae.

  • Page 11: Customer Support

    Call toll-free: 800-333-0136 Service hours: Monday through Friday, 7 a.m. to 6 p.m. CST (except official holidays) E-mail: RVNDSupport@randmcnally.com Web: www.randmcnally.com/rvgps Mailing Address: Rand McNally 9855 Woods Drive Skokie, IL 60077 Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 12: Getting Started

    Your TripMaker RVND includes: • TripMaker RVND navigation device • Mount and cradle • 12V vehicle charger • Home charger (100/240V) • USB cable • Extra fuse • Quick Start Guide Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 13: Important Safety Information

    Note: If you do not understand the spoken instructions, or are unsure of what to do next, refer to the navigation map on your navigation device. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 14: Installation Safety

    Caution: After installation, check all safety-relevant equipment in the vehicle. Caution: Connect the wall charger to a 120V or 240V outlet only. Caution: Connect the vehicle charger to a 12V outlet only. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 15: Device Safety

    Caution: Do not open the navigation device casing. Caution: Do not attempt to replace the battery. For problems with the battery, contact Rand McNally Customer Support. Caution: Always follow local regulations when disposing of this device.

  • Page 16: Battery Power Light

    Battery Power Light When the device is charging, the power light on the front of the device RVND 5510 displays the status of the built-in battery: Battery Green Device is plugged in and the battery is fully charged. Power Light Device is plugged in and the battery is charging.

  • Page 17: Charge The Battery

    1. Plug the mini-USB socket into the port on the side of the device 2. Plug the vehicle charger into the vehicle power outlet or cigarette lighter. 3. The vehicle may need to be on for the device to charge. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 18: Install The Cradle And Mount

    9. Plug the power cord into the device and the vehicle’s 12 volt power source. 10. Adjust the navigation device so that it can be easily seen and does not block the driver’s line of sight. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 19: Power The Device

    Reset the Device When you reset the device, your current route information is lost. Address Book entries, trips, settings, ratings, and messages to Rand McNally are not affected. • Use the stylus to press the reset button on the side of the device.

  • Page 20: Basic Operation

    Warning and Legal Consent Window 5. Tap Accept or if you turned the device off while on a route, tap Accept and Continue Previous Route. displays. Warning and Legal Consent Window (Mid Route) Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 21: The Main Menu

    Choose Destination Tap to select an address, point of interest (POI), to create a multi- stop trip, or access Rand McNally exclusive pre-planned trips. Also used to select an Address Book entry or a previously selected POI from the History List Preferences Tap to set general, route, or map preferences.

  • Page 22: Tapping The Screen

    ) and Page Down ( ) buttons to move between pages. Increase/Decrease Buttons Increase/Decrease Some options can be set to specific values. On these windows, tap on increase decrease buttons to change settings. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 23: Using Keyboards

    Tap to view a list of names matching the typed characters. QWERTY Keyboard Tap to view a list of previously selected locations. Add a space. Display the Symbol keyboard and type a symbol. Delete last character and move back one space. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 24: Routing Messages

    Your trip starts and stops in the same state and the vehicle is in violation. Interstate Violation If your trip starts and/or stops in two different states and the vehicle is in violation of one of these states. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 25: Basic Settings

    1. Tap Preference. 2. Tap on the Keyboard option. 3. Tap to view the options. 4. Tap on the Keyboard option and select the keyboard type. 5. Tap to save changes. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 26: Volume Settings

    . Button changes to UnMute Spoken Instructions • Tap . Button changes to You may also tap on . while in driving mode to immediately mute the Volume Controls Volume. Mute Softer/Louder Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 27: Set Rv Information

    1. Tap RV Tools > RV Info. 2. Tap to view the options. 3. Tap on the ETA Adjustment option and select the type of adjustment to be performed. 4. Tap to save changes. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 28: Select Rv Or Car Mode

    1. Tap Preferences. 2. Tap on the Route tab. 3. Tap to view the options. 4. Tap on the Route option and select the route type. 5. Tap to save changes. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 29: Select A Voice For Spoken Instructions

    1. Tap Preferences. 2. Tap on the Voice Name option. 3. Tap to view the options. 4. Tap on the Voice Name option and select a voice. 5. Tap to save changes. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 30: Select A Vehicle Icon And Color

    6. Tap and drag the on the color bar to select a color. The selected icon and color display above the color bar. 7. Tap to save changes. Vehicle Icon and Color - Car Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 31: Set Warnings

    Note: To turn specific warnings off completely, tap the button until “Off” displays. To turn off all warnings, select “None” under Warning/Alert Prompts as is shown in the image on the left. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 32: Maps

    Displays the current speed. Tap on the current speed to display the Virtual Dashboard. Icon turns red when vehicle speed is over the posted limit. To set a speed alert, see “Set Warnings” on page 120. Rand McNally TripMaker RVND User’s Guide Version 1.04...
  • Page 33 Tap to change the map display. An icon in the upper right button corner displays the selected option: Heading Up (arrow), North Up (N), 3D View (3). Main Menu Tap to return to Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 34: Select A Display Time Option

    • Remaining Time - Remaining time and miles to destination. • Local Time - Current vehicle location time. • Elevation - Presents the current elevation. Route Map Window - Time Field redisplays. oUte indow Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 35: Exit Pois Slide Out List

    Up/Down Tap to scroll up and down to view the list of exits. Tap on any item in the list to view it on the map. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 36: View Pois At A Selected Exit

    Detail Provided When List Button is Tapped 6. On the confirmation window: • Tap Begin New Route to route to the POI. poi t • Tap to return to the indow Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 37: Directions Slide-Out List

    3. On the Route Display Mode, tap on a view. Route Display Mode Window 4. The map displays the selected view. 5. Use to view the instructions. 6. To hide the slide out list, tap Route Option - Highway View Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 38: Detail View

    Tap to select another route display option. Up/Down Tap to scroll up and down to view the list of maneuvers. Tap on any item in the list to view it on the map. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 39: Highway View

    Tap to select another route display option. Up/Down Tap to scroll up and down to view the list of maneuvers. Tap on any item in the list to view it on the map. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 40: Route Summary

    Tap to select another route display option. Up/Down Tap to scroll up and down to view the list of maneuvers. Tap on any item in the list to view it on the map. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 41: Summary Map View

    Tap to return to the Route Map Window. Total Dist Total distance for the entire trip. Total Time Total time to complete the entire trip. Vehicle Location Current vehicle location on the route. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 42: Current Location Information

    Current road information displays. 3. Tap on the Location Information field again. Next intersecting street name displays. 4. Tap the Location Information field again to redisplay the city, county, and state information. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 43: Junction View

    Number and direction of lanes for the next maneuver. Orange lanes are the ones you should be in. Distance Distance to the upcoming maneuver. Distance decreases as you approach the ramp. Back Tap to return to the oUte indow Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 44: Virtual Dashboard

    Reset trip information for the selected trip (Tab 1, Tab 2 or Tab 3). Auto Reset Select to define how much time should elapse before an auto reset of a particular tab occurs. See page 39 for a detailed description. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 45: Show/Hide The Virtual Dashboard

    2. Tap on a tab (Tab 1, Tab 2, or Tab 3). 3. If necessary, tap Reset All to set the odometer for the selected tab back to zero. Note: Last reset details the time the open tab was last reset. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 46: Automatically Reset Trip Information

    5. To save changes, tap Change. The Virtual Dashboard redisplays. The Tab displays the auto reset number of hours. Virtual Dashboard - Auto Reset Window Virtual Dashboard - Auto Reset On Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 47: Detours

    3. On the left side of the window, tap the number of miles on the route to be avoided. A new route is calculated and the redisplays. oUte indow Detour Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 48: Detour Around A Specific Roadway

    A yellow checkmark appears in front of each selected road. Location Route Options Window 5. Tap Detour to recalculate the route. A new route is calculated and the redisplays. oUte indow Detour Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 49: Detour Using The Detail View Route Display Option

    4. On the Detour popup window, tap on the length of highway you want to avoid. 5. Tap Back. A new route is calculated avoiding (if possible) the selected length of highway. The slide out list redisplays, showing the new route. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 50: Tap On The Map And Detour Around A Route Segment

    The crosshairs display on the segment. 3. Tap Detour. displays the detour around the selected segment. oUte indow Route Map Window (Route Segment to Avoid) Route Map Window (Detour Around Segment) Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 51: Cancel A Route

    While navigating a route: Route Map Window 1. Tap displays. ocation oUte ptions indow 2. Tap Cancel Route. The route is cancelled and the displays your current location. oUte indow Location Route Options Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 52: Using Predictive Traffic (Select Units)

    4. Choose Optional Route, Traffic on Route, or Traffic List to view Choose Anticipated Day and Time of Travel, options and details. Select Options or View Details List of Anticipated Traffic Along Route based on Historical Traffic Patterns Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 53: Destinations

    Find a Rand McNally Trip: You can also find a Rand McNally trip by: • “Select a Rand McNally Best of the Road© Route” on page 77. • “Select a Rand McNally Weekend Getaway” on page 78. • “Select a Rand McNally Scenic Tour” on page 79.

  • Page 54: Location Searches

    Tap to search for a point of interest (POI) such as a gas station, restaurant, etc. Rand McNally Trips © Tap to select a Rand McNally Best of the Road , Weekend Getaways, Scenic Tour or Regional Trip. Rand McNally TripMaker RVND User’s Guide...

  • Page 55: Destination Search Auto-Complete Feature

    Tap to view a list of previously selected locations. Tap to enter a space. Tap to view the Symbols keyboard and select a symbol. Tap to delete the last character and move the cursor back one space. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 56: About City Street Names

    If the next letter in the street name can not be selected on the keyboard, tap Expand Search to search a greater area. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 57: Select A City

    Tap on the city/state name to select it. Special note: If a city name appears twice within a state, you may need to check both for your specific address. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 58: Find Addresses

    Tap to search for an address by entering the city and two intersecting roads. Enter Lat/Long Tap to search for a location by latitude and longitude. Main Menu Tap to return to the Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 59: Search For An Address

    Enter House Number 8. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 9. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 60: Search For A City Center

    4. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 5. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 61: Search For An Intersection

    Select Intersecting Street List 8. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 9. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 62: Search By Zip Code For An Address

    8. Tap on the street number range from the list. confirmation window displays. Enter House Number 9. Tap Begin New Route to navigate to the location. 10. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 63: Search By Zip Code For An Intersection

    Select Intersecting Street Window 8. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 9. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 64: Search By Latitude/Longitude

    Enter Longitude Window 7. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 8. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 65: Point Of Interest Windows

    Tap to access Custom POIs. See page 51 for more detail. Quick Stops Tap to find a RV-friendly POI near the current vehicle location. See “Select a Quick Stop POI” on page 61. Main Menu Tap to return to the Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 66: Points Of Interest (Poi) Category Window

    Tap to search for RV parking or a rest stop. Travel Centers Tap to select a travel center POI. Rand McNally Editor’s Picks Tap to select a Rand McNally Editor’s choice POI. More Tap to select a consumer (non-RV) related point of interest. Custom POIs Tap to find third party POIs loaded via the Dock.

  • Page 67: Points Of Interest (Pois) Searches

    -------------Rand McNally POIs-------------- Rand McNally Editor’s Pick You can select an Editor’s Pick POI (see page 65). • Rand McNally Editor’s Picks -------------Consumer-Related POIs-------------- Consumer POIs You can select a POI by category (see page 67) or by name (see page 68).

  • Page 68: Select A Quick Stop Poi

    Uick indow 3. Tap on a POI type. displays. Uick 4. Tap on a location from the list. Note: Walmart Button provides searchable amenities for parking, pharmacy and open 24 hours. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 69: Select An Rv Point Of Interest

    Ratings for the location also display to the right of the POI. The top row indicates community ratings. The second row indicates your personal ratings of the POI. Note: For more information see “Rate a RV-Related Point of Interest” on page 83. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...
  • Page 70 • Begin Route to calculate and start a route. • View Pictures to view photos of the location (if available). • New Videos to watch videos of the location (if available). • Main Menu to return to the Main Menu. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 71: Select And Filter Travel Center Amenities

    A checkmark displays in the Filter button. displays POI locations with your selected amenities. RaVel enteR indow Filter Services Window Select Travel Center WIndow - Filtered 7. Tap on a location from the list. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 72: Select A Rand Mcnally Editor's Pick

    Select a Rand McNally Editor’s Pick 1. Tap Choose Destination > Points of Interest. POI Category Window 2. Select a search type (My RV/Near Car, City, My Route or Destination). poi c On the ategoRy indow 3. Tap Rand McNally Editor’s Pick.
  • Page 73 • Begin Route to calculate and start a route. • View Pictures to view photos of the location (if available). • New Videos to watch videos of the location (if available). • Main Menu to return to the Main Menu. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 74: Select A Consumer Point Of Interest By Category

    5. If necessary, tap on a subcategory type. (For example, tap Park and Ride.) displays POI locations. elect oint of nteRest indow Select Category Window 6. Tap on a location from the list. Select Subcategory Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 75: Select A Consumer Point Of Interest By Name

    7. Tap on the POI name in the displayed list. Select Point of Interest Window 8. The displays POI locations. elect oint of nteRest indow Enter POI Name Window 9. Tap on a location from the list. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 76: Search For Nearby Points Of Interest (Pois)

    • RV Campgrounds, RV Services, Parking Rest Areas, or • Travel Centers and filter for amenities. (See page 64.), or Select <POI Type> Window • Rand McNally Editor’s Picks (see page 65), or • Other Categories and select a Consumer POI. See page 67 and page 68.

  • Page 77: In A City

    • RV Campgrounds, RV Services, Parking Rest Areas or • Travel Centers and filter for amenities. (See page 64.) POI Category Window • Rand McNally Editor’s Pick (see page 65), • Other Categories and select a Consumer POI. See page 67 and page 68. <p >...

  • Page 78: Along Your Route

    • RV Campgrounds, RV Services, Parking Rest Areas or • Travel Centers and filter for amenities. (See page 64.) • Rand McNally Editor’s Picks (see page 65), or • Other Categories and select a Consumer POI. See page 67 and page 68.

  • Page 79: Near Your Destination

    • RV Campgrounds, RV Services, Parking Rest Areas or • Travel Centers and filter for amenities. (See page 64.) Select <Point of Interest Type> Window • Rand McNally Editor’s Picks (see page 65), or • Other Categories and select a Consumer POI. See page 67 and page 68..

  • Page 80: Custom Poi Imports

    Note: Specific icons and colors may vary depending on your unit. 2. Use the Rand McNally Dock to transfer the point of interest file to your device. Plug your device into your computer via USB and wait for the Rand McNally Dock to start.
  • Page 81 Note: “Failed records” are those for which some information was dropped from the record, or the locations were invalid. Load Complete Screen poi d When transfer is complete, the Load Complete: UstoM atabase window will display. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 82: Changing The Custom Poi Display Or Warning Settings

    1. Select the Custom POI Button – Manage POIs 2. Select from the list available. Example of Imported Custom POI Lists Change Settings for Custom POI Category Custom POI Screen Access Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 83: Rand Mcnally Trips

    Rand McNally Trips Rand McNally Trips Window Back Return to previous window. © Best of the Road Tap to select from among pre-planned routes designed by Rand McNally’s editors, and nominated as the “Best of the Road”. Stop at interesting and enjoyable places. May include video and photo content.
  • Page 84 Select a Rand McNally Best of the Road © Route From the Best of the Road Selection Window 1. Tap Choose Destination > Rand McNally Trips displays. estination election indow 2. Tap Best of the Road. displays. est of the...

  • Page 85: Select A Rand Mcnally Weekend Getaway

    Select a Rand McNally Weekend Getaway From the Weekend Getaways Selection Window 1. Tap Choose Destination > Rand McNally Trips displays. estination election indow 2. Tap WeekEnd Getaways. displays. eekend etaways election indow 3. Tap to view all available trips.

  • Page 86: Select A Rand Mcnally Scenic Tour

    Select a Rand McNally Scenic Tour From the Scenic Tours Selection Window > 1. Tap Choose Destination Rand McNally Trips displays. estination election indow 2. Tap Scenic Tours. displays. cenic oURs election indow 3. Tap to view all available trips.

  • Page 87: Select A Rand Mcnally Regional Road Trip

    Select a Rand McNally Regional Road Trip From the Regional Road Trips Selection Window > 1. Tap Choose Destination Rand McNally Trips displays. estination election indow 2. Tap Regional Road Trips. displays. egional Rips election indow 3. Tap to view all available trips.

  • Page 88: Tap On The Map

    Avoid, it will avoid for the currently route only, i.e. not permanently. You can also manage your Avoid List in the preferences menu. Choose Preferences> Avoid List. 5. Tap to return to the map. See “Route Map Window” on page 116 for more options. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 89: Tap On The Map And Route To The Location

    6. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 7. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 90: Rate A Rv-Related Point Of Interest

    6. Tap to save changes. confirmation window displays. Your rating displays on the button. Create Comment Window Note: To share ratings with fellow drivers, you must install the Rand McNally Dock software. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 91: Address Book

    5. Tap Close to redisplay the confirmation window. . Enter Name Window 6. Tap Begin New Route to navigate to the location. 7. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 92: Sort Address Book Entries By Name, Distance Or Date

    4. To sort by date entered, Tap Sort by Date Entered. Sort By Window 5. When finished: • Tap to return to the estination election indow • Tap to return to the Address Book Window - Sorted by Distance Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 93: Select A Location From The Address Book

    4. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 5. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 94: Create An Address Book Group

    Enter Name Window 6. Tap on a color, then tap Close. 7. When finished, tap Enter. Groups tab redisplays. The new group name is shown. Choose Folder Color Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 95: Add An Address To A Group

    • History, Saved, or POI, the selected location is added to the group. • Enter a New Address, the Window displays. efaUlt onfiRMation Tap Yes to accept the default name or tap No to display a keyboard. Add Destination Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 96: Remove An Address From A Group

    3. Tap on the Group you want to remove the address from. 4. Tap on the next to the address to be removed. A confirmation window displays. 5. Tap Yes. Address Book Group redisplays with the address removed. Confirmation Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 97: Select A Location From A Group

    Group Address List 5. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 6. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 98: History List

    3. Tap Begin New Route to navigate to the location. See “Address Confirmation Window” on page 99 for more options. 4. If a warning message displays, select the appropriate response. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 99: Multi-Stop Routes

    Enter Name Window 5. Tap on a color, then tap Close. 6. When finished, tap Enter. redisplays. Ulti Rips indow The new trip name is shown. Choose Folder Color Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 100: Add Locations To A Multi-Stop Route

    7. To change the order of the stops, see: • “Optimize a Route Manually” on page 97. • “Optimize a Route Automatically” on page 98. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 101: Remove A Stop From A Multi-Stop Route

    2. Tap on the route. displays. oUte 3. Tap on the next to the stop to be removed. A confirmation window displays. 4. Tap Yes. redisplays with the stop removed. oUte Confirmation Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 102: Select And Run A Saved Route

    • Skip Next Stop - To skip the next stop and calculate a route to the stop after the next one. • End Current Trip - To end the route at the current stop. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 103: Delete A Multi-Stop Route

    • Yes to delete the route. • No to keep the route. 4. The redisplays. Ulti Rips indow If you tapped Yes, the selected route has been removed. Multi-Stop Route List Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 104: Optimize Routes

    5. Tap on the stop to be moved and tap: To move the stop up in the route. To move the stop down in the route. 6. When finished, tap OK. redisplays. oUte indow Reordering <Route Name> Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 105: Optimize A Route Automatically

    • Yes to return to your current location to complete the route. • No to complete the route at the last stop. redisplays. oUte indow 8. Tap Start Trip to begin the route. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 106: Destination Confirmation Windows

    Save to Address Book Add the location to the Address Book. Atlas View Rand McNally Road Atlas. “P” refers to the Road Atlas page number. The letter-number combination refers to the grid location. Go to Map Tap to view this location on a map.

  • Page 107: Consumer Point Of Interest Confirmation Window

    Add the location to the Address Book. See “Address Book” on page 84. Atlas Cross-reference to printed Rand McNally Road Atlas. “P” refers to the Road Atlas page number. The letter-number combination after that refers to the grid location Go to Map Tap to view this location on a map.

  • Page 108: Rv-Related Point Of Interest Confirmation Window

    Save to Address Book Add the location to the Address Book. See “Address Book” on page 84. Atlas Cross-reference to printed Rand McNally Road Atlas. Go to Map Tap to view this location on a map. Services Tap to view RV amenities at this location.

  • Page 109: Rand Mcnally Editor's Picks Confirmation Window

    Save to Address Bk Add the location to the Address Book. See “Address Book” on page 84. Atlas Cross-reference to printed Rand McNally Road Atlas. Go to Map Tap to view this location on a map. Set Origin Tap to set the location as the origin in a route.

  • Page 110: Address Book Confirmation Window

    Add to Group Tap to add the location to an Address Book group. Atlas Cross-reference to printed Rand McNally Road Atlas. Go to Map Tap to view this location on a map. Set Origin Tap to set the location as the origin in a route. This can be used for routes that start from somewhere other than the last known location.

  • Page 111: Real-Time Traffic (Optional Service)

    Note: Real-Time traffic is an optional service. Menu Tap to return to the Route Map Window - Traffic Icon Access the Real-Time Traffic Window On the oUte indow • Tap displays. Raffic indow Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 112: View Real-Time Traffic

    You can choose to ignore the warning or to recalculate a route avoiding the problem. To use this feature, you must purchase a Rand McNally Real-Time Traffic Receiver. The receiver also comes with a lifetime traffic subscription.

  • Page 113: Rv Tools

    View Rand McNally Emergency contact information, and fun facts about each state, Canadian province, or country of Mexico. Tell Rand Compose a message that will be sent to Rand McNally next time you connect to Rand McNally Dock. Converter Quickly convert distance, weight, and temperatures.

  • Page 114: Rv Checklists

    The number of completed tasks displays on the right (for example, 2 or 29). Note: If you accidentally delete a default checklist, tap Restore Default. (This may take a minute or two.) Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 115: Create A Custom Checklist

    The new checklist is added to the end of the listing. On the right, the numbers (0 of 0) indicate that no tasks have been added to checklist. Checklists Tasks List Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 116: Add Tasks To A Checklist

    The new checklist is added to the end of the listing. On the right, the numbers (0 of 0) indicate that no tasks have been added to checklist. Enter Item Name Window Selected Checklist Tasks List - After Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 117: Remove Tasks From A Checklist

    5. Tap: • Yes to delete the task. • No to keep the task. redisplays. hecklist asks The task has been removed from the checklist. Selected Checklist Tasks List - After Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 118: Delete A Checklist

    • No to keep the task. redisplays. hecklist asks The checklist has been deleted. Note: If you accidentally delete a default checklist, tap Restore Default to recover it. This may take a minute or two. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 119: Rv Maintenance Notes

    Notes are shown by date, the most recent first. 3. Tap to scroll through the list. 4. Tap on the Note you want to view. displays. etail indow 5. When finished, tap Note Detail Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 120: Add A Maintenance Note

    Enter Note Window displays. indow 6. Tap to select the date. 7. When finished, tap OK. The new date displays on the etail indow Enter Date Window 8. Tap redisplays. aintenance otes indow Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 121: Update An Existing Maintenance Note

    7. To change the note date, tap Edit Date. displays. nteR indow to select the date and tap OK. 8. Use displays the new text. etail indow 9. When finished, tap redisplays. aintenance otes indow Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 122: Delete A Maintenance Note

    A confirmation message displays 5. Tap: Maintenance Notes Window - After • Yes to delete the note. • No to keep the note. redisplays. aintenance otes indow The note has been deleted. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 123: Trails

    The Trail icon ( ) displays. 5. When you wish to stop recording, tap on the Trail icon. displays. ecoRding Rail indow 6. Tap OK. The trail is saved. Trails Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 124: Rename An Existing Trail

    4. Tap Edit Name. displays. nteR Rail indow 5. Type the new text and tap Enter. Trail Route Window redisplays. oUte indow Trail information is updated. Enter Trail Name Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 125: Delete A Trail

    A confirmation message displays 4. Tap: • Yes to delete the note. • No to keep the note. Trails Window - After redisplays. Rail indow The trail has been deleted. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 126: Display A Trail

    • Trail and Vehicle to show the trail and your current location. • Hide Trail to not display the trail 7. Visually follow the trail. Note: Because this mode may not contain roads, no voice direction is available. Route Map Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 127: Set Warnings

    2. Tap to view the options. 3. Tap the warning to be set. 4. Tap to specify the number of miles or hours. 5. Tap to save changes. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 128: Calculate A Mileage And Driving Time

    • Tap to decrease or increase the speed. • Tap to enter a speed. 7. The redisplays and shows the updated costs and Uick lanneR indow driving time. Enter Amount Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 129: View Atlas Information

    View Atlas Information From the Rand McNally Road Atlas Window 1. Tap RV Tools > Road Atlas Information. displays. ally tlas indow 2. Select the appropriate country tab. State List (USA.), Province List (Canada) or Mexico displays. 3. Tap on the appropriate U.S. state or Canadian province.

  • Page 130: Send A Message To Rand Mcnally

    Send a Message to Rand McNally Tell Rand McNally About Window You can send a message to Rand McNally about updates such as road construction, updates to RV road information, etc. To use this feature, you must install the Rand McNally Dock application on your computer.

  • Page 131: To Send A Message About Speed Limit Difference While In Navigation Mode

    Navigation Mode: 1. Tap on the Speed Limit Icon 2. A pop up screen will allow you to notify Rand McNally of a change in speed limit. 3. Make any changes. If the speed limit you are currently traveling is accurate, send to Tell Rand.

  • Page 132: Send A Message About A Different Location

    Note: You only need to enter a few brief words here, since you will be able to modify the message later in Rand McNally Dock, using your computer keyboard, before it is sent to Rand McNally. Your message can be sent to Rand McNally the next time you...

  • Page 133: Send A Message About A Location On The Map

    To discard the message and return to the previous window, tap redisplays. ally boUt indow Your message can be sent to Rand McNally the next time you connect your TripMaker RVND to your computer and use Rand McNally Dock. Enter Message Window Rand McNally TripMaker RVND User’s Guide...

  • Page 134: Use The Unit Converter

    2. Tap on the first field and select the type of conversion to perform. redisplays. onVeRteR indow 3. Tap on the second field and enter the value to be converted. 4. Tap Enter. redisplays and displays the converted value. onVeRteR indow Conversion Types Window Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 135: Use The Calculator

    Calculator From the 1. Tap RV Tools > Calculator. 2. Tap keyboard as you would on any other calculator. RV t 3. When finished, tap to return to the ools indow Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 136: Customize

    RV height. ETA Adjustment Specify how arrival time should be estimated. Options are: ETA OK (no adjustment), Increase ETA Some, Increase ETA More, Decrease Some Time, and Decrease More Time. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 137: General Preferences (Rv Or Car)

    ABC or Computer (QWERTY). Voice Name Select the voice to be used to issue spoken instructions. Language Select the language to be used to display on the device and issue spoken instructions. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...
  • Page 138 Note: Select this option if your RVND seems to have buttons that are hard to tap. You may need to realign the screen after a software update using Rand McNally Dock. GPS Data View information on the current GPS fix.

  • Page 139: Route Preferences

    Options are: Allow U-Turns or Avoid U-Turns. See note above. Ferries Select whether ferries are considered in a calculated route. Options are: Allow Ferries or Avoid Ferries. See note above. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...
  • Page 140 Route Preferences Window (page 3) calculated route. Options are: Allow Tunnels or Avoid Tunnels. See note above. Avoid List This allows you to view and/or re-open road segments which you have “permanently” avoided. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 141: Map Preferences

    Specify whether RV-related point of interest icons display on the map. Options are: POI Icons On or POI Icons Off. As these POIs may be farther apart, they display when zoomed farther out. Rand McNally TripMaker RVND User’s Guide Version 1.04...
  • Page 142 RV icon and color to be used on the device. With some icons, you can select from an infinite range of colors. Route Color Allows you to select the color of the route line. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 143: Warning Options

    Construction Area Specify when (in miles or kilometers) to issue a warning about upcoming road construction. Speed Limit Change Specify when (in miles or kilometers) to issue a warning about a speed limit decrease. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...

  • Page 144: Rand Mcnally Dock

    Rand McNally Dock Download and Install Note: An internet connection is required for this feature.. 1. Go to http://www.randmcnally.com/dock/ and download Rand McNally Dock. 2. Turn on you TripMaker and connect the RVND to your computer using the USB cable.

  • Page 145: Rand Mcnally Dock Main Window

    RVND Support Website Click to view the RVND support website. Go to Rand McNally Website Click to view the Consumer website. Announcements Find out what is new from Rand McNally, retrieve important support notices Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 146: Go To Rand Mcnally Website

    Note Connection to the internet is required to access the website. On the ally indow • Click on the Go to the Rand McNally Website link. The Rand McNally Consumer Home Page displays. Rand McNally TripMaker RVND User’s Guide Version 1.04...

  • Page 147: Updates

    2. If RVND software updates are found, click OK. The RVND Updates Progress Bar displays as the updates are transferred to your device. If Rand McNally Dock updates are found, a message displays. 3. Click Yes to update the software.

  • Page 148: View Rvnd Version Information

    View RVND Version Information These logs are part of Rand McNally’s continuous improvement program and only contain information that can be used to diagnose software problems during device operation. No location, tracking or personal information is included. The information about your specific device is shown here. This information will be necessary when contacting customer support.

  • Page 149: View Manual

    Note: You must be connected to the internet for the first use only. After that, User’s Guide you can view the manual at anytime without an internet connection. Note: Some Rand McNally Dock features require an internet connection. On the ally indow •...

  • Page 150: Tell Rand Mcnally

    2. To add a comment, click Add Comment and enter information in the provided fields. 3. To delete a comment, click on the comment and click Delete Comment. Note: To receive a personal response from Rand McNally, include your e-mail address somewhere in the message text. 4. When finished, click Done.

  • Page 151: Go To Rvnd Support Website

    Go to RVND Support Website On the ally indow • Click on the RVND Support Website button. The RVND Support Website displays. Rand McNally TripMaker RVND User’s Guide Version 1.04 ®...
  • Page 152 ......... 88 Consumer Point of Interest ......100 create a group ........... 87 Rand McNally Editor’s Picks ......102 remove an address from a group ....... 89 RV-Related Point of Interest ......101 save a location ........... 84 consumer POI save a location to ..........
  • Page 153 ............. 92 install delete a ............. 96 cradle and mount ..........11 remove a stop from a ........94 select and run a saved ........95 mute volume ..............19 Rand McNally TripMaker RVND User’s Guide Version 1 ®...
  • Page 154 ............ 32 consumer ............67 route summary ..........33 POI Category Window ........59 select a route display option ......30 Rand McNally Editor’s Picks ........ 65 summary map view ........... 34 RV-related ............62 routes types of ............. 60 cancel ............
  • Page 155 ..........68 create a custom ..........108 quick stop ............61 delete a ............111 Rand McNally Editor’s Pick ......... 65 remove tasks from a ........110 select and complete a ........107 RV-related ............62 travel center ............64 maintenance notes ..........
  • Page 156 Rand McNally trips window ....... 76 turn off the device ............12 real-time traffic ..........104 turn on the device ............12 route map ............25 type of route RVND Dock main ..........138 select fastest or shortest ........21 RV tools............

This manual is also suitable for:

Tripmaker rvnd 7710

Table of Contents