2.18 Emulation Mode of Operation
The DEClaser 2100 plus operates using DEC PPL3 mode. If you have an
optional emulation cartridge installed, select Emulation Mode to invoke a
protocol from the cartridge.
Use the procedure in Table 2–8 to select Emulation Mode.
Table 2–8: Selecting Emulation Mode
Operation
1.
Press
to place the printer
On Line
off line.
— The On Line indicator goes off.
2.
Press and hold
Menu
4 seconds.
/
.
3.
Press
or
to select
Emulation Mode.
r
4.
Press
to select and save
Enter
the mode.
— The mode is automatically saved
in NVRAM.
Display Reads
00 READY
for about
MODE = DEC 00
MODE
00 READY ''EMULATION NAME''
or
READY
''EMULATION NAME'' xx
Operating Information
2–53