Jibsheet - Nacra F16 Assembly Manual

4.6 Jibsheet

2
1
4. The jibsheet small (1) must be on top of the
jibsheet big (2).
6. Tie the end of the jibsheet small to the 16mm
block already attached at the jibsheet big.

Take the jibsheet small, one carbo 29mm block and a Shackle D 5mm.

Tie one end onto the middle of the 29mm block and the feed the jib-
sheet through the the first sheave of the double block located on the
traveller of the selftacking track.

Feed the line through the carbo 29mm block and through the second
sheave of the double block.
NACRA EMPOWERING SAILORS SINS 1975
5. Loop the end through the block on the
spipole located back of the compression
pole
7. Feed the track travellerline of the jib
through the cleat mounted on the spi-
pole to range the track.