Spipole - Nacra F16 Assembly Manual

4.5 spipole

1.
2. Attach the spipole on the spipole outhol-
der
3. Push the spipole gently down in order to
attach the front spipole bridle located on
the front of the spipole on the bridle pin
with the clevispins 3/16 x 3/8.
4. Tie the snufferline in front of the snuffer-
ring. The other end must be tied on the
ring at the bridle
The line goes in the slot on the front of
the snuffer ring
NACRA EMPOWERING SAILORS SINS 1975
Note: F18 infusion
First slide the spipole througt the spipole holder ring .
Slide the spipole over the spipole pin on the front
crossbar.
Make sure the jibsheet is on top of the spipole
5. Tie the spipole bridle line in
front of the spipole outholder.
Tie the other end to the rings
at both bridle wires.