Battens - Nacra F16 Assembly Manual

5.4 battens

1. Pull the two batten tension lines through the
small hole in the batten from bottom to top.
Make sure each line stays on his own side.
2. Go through the grommet in the battenpocket
from outside in.
3. Push the batten forward for tension, tie the
overhand knot at the same time. Just get rid of
the wrinkles in the sail
4.
NACRA EMPOWERING SAILORS SINS 1975
Finish tying with a square knot and tuck the loo-
se ends in the batten pocket.