Table of Contents
Advertisement
Use and Controls
1
Fig. 1
To switch the power on/off
Touch and hold the power button for five seconds.
To change the temperature
•
Touch the "+" or "-" buttons for the appropriate zone until the required
temperature is shown on the display.
•
The preset temperature is 10°C/50°F for the upper zone and
16°C/60°F for the lower zone.
•
To change the temperature display from Fahrenheit to Celsius, or
Celsius to Fahrenheit, touch and hold the light button for five seconds.
•
To view the set temperature, touch the appropriate "+" or "-" button at
any time and the set temperature will flash in the LED display for five
seconds.
•
The display shows the current internal temperatures when the wine
cooler is on.
Please note: The temperature in the lower zone must be set either the
same or higher than the temperature in the upper zone. For optimal
performance, the temperatures in the two zones should differ by at
least 4˚ C.
6
2
3
4
5
6
Key:
1 – Power button
2 – Upper zone "+" button
3 – Upper zone "-" button
4 – Lower zone "+" button
5 – Lower zone "-" button
6 – Light button
Advertisement
Table of Contents
