Table of Contents
Advertisement
Before First Use
You must allow the appliance to settle for at least twenty four hours
prior to switching the power on.
It is recommended that you remove all internal and external packaging
and clean the interior of the appliance prior to first use, using a solution
of bicarbonate of soda and warm water and then thoroughly dry the
interior.
The appliance may have an odour to it at first use. This will disappear as
the appliance cools.
Please note:
•
The appliance will work continuously until it gets to the correct
temperature.
•
If the appliance is switched off, you should allow five minutes before
switching it on again to prevent the risk of unnecessary damage to
the compressor.
•
The LED display may not show the selected temperature whilst the
appliance first gets to the correct temperature. This is normal, and the
display will be corrected automatically once the appliance has run for
a few hours.
Use
•
Only store wine in sealed containers.
•
Do not overload the cabinet.
4
Advertisement
Table of Contents
