Table of Contents
Advertisement
Reversing the Door
It is possible to reverse the door on this
appliance, if required.
To do so, follow the steps below:
1. Remove both plastic covers "1" then
remove the bottom hinge "3" by
unscrewing the four screws "2". Be
careful not to allow the glass to drop
after removing the screws (Fig. 6).
2. Gently pull down to remove the glass
door from the right top hinge and
place it on a padded surface to avoid
the risk of damage. Then remove the
right top hinge "8" (Fig. 8).
3. Pop out the cover caps on the left
side of cabinet and use them to cover
the screw holes on the right hand
side.
4. Screw the alternative left top hinge "7",
included in the fittings, onto the left
hand side of the cabinet (Fig. 7).
16
Fig. 6
Fig. 7
Fig. 8
Advertisement
Table of Contents
