Table of Contents
Advertisement
5. Unscrew the door spacer "4" from the
lower end of the door, move it to the
other end and fasten it there (Fig. 9).
6. Unscrew the hinge pin from the
bottom hinge (removed at stage 1,
above) and attach it to its alternative
location in the same hinge bracket
(Fig. 10).
7. Rotate the glass door 180° and locate
its top onto the hinge pin of the top
hinge bracket. Whilst holding it in
position, fit the lower hinge bracket "3"
(modified in 6 above) onto the cabinet
and through the spacer "4" on the
glass door (Fig. 11).
8. Fit the plastic covers "1" (Fig. 6).
Fig. 9
Fig. 10
Fig. 11
17
Advertisement
Table of Contents
