Deleting The Icons Displayed After Searching For A Nearby Poi; Selecting Destination From Stored Locations; Selecting A Location You Searched For Recently - Pioneer AVIC-Z150BH Operation Manual

Chapter
04 Searching for and selecting a location
How to read the "POI List" screen
The following information is displayed on the
POI List screen.
1 Facility name
2 Facility address
3 Distance from the position that the search
starts
p If you touch
facility appears.
Deleting the icons displayed
after searching for a nearby POI
After searching for a nearby POI, the icons of
nearby facilities appear on the map. The fol-
lowing operation shows how to delete the
icons.
Display the "View" screen.
1
= For details of the operation, refer to Switch-
ing the view mode on page 35.
2 Touch [Del. Search Results].
All displayed icons are deleted.
Selecting destination from
stored locations
Storing locations you visit frequently saves
time and effort.
Selecting an item from the list provides an
easy way to specify the position.
p This function is not available if no locations
have been registered in My POIs .
= For details, refer to Storing favorite locations
on page 52.
44
En
1 2 3
, detailed information of the
Display the "Destination" screen.
1
= For details of the operations, refer to How to
use the navigation menu screens on page
24.
2 Touch [My POIs].
A list of registered locations appears.
3 Touch the entry you want.
The searched location appears on the map
screen.
= For subsequent operations, refer to Setting
a route to your destination on page 46.
You can switch the list display between Fa-
vorites and History by touching the tabs.
# If you touch [Sort], you can sort the entry by
following order.
! By Date (default):
Sorts the list in chronological order of regis-
tration or call up.
! By Distance:
Sorts the list in order by distance from the
vehicle position.
! By Name:
Sorts the list alphabetically.
Selecting a location you
searched for recently
The places that you set as destinations or way-
points previously are automatically stored in
History .
p If no location is stored in Destination His-
tory, you cannot select [History]. (If you
perform a route calculation, you can select
[History].)