Adjusting Source Levels - Pioneer AVIC-Z150BH Operation Manual

Customizing preferences
! A Custom2 curve can be created com-
mon to all sources. If you make adjust-
ments when the Custom2 curve is
selected, the Custom2 curve will be up-
dated.
! The Custom1 curve is applied to each of
the sources selected, but you can apply the
same curve to the following sources.
AV1 and AV2
CD, ROM, DVD-V, and DivX
SD and USB
Bluetooth Audio, Pandora (Bluetooth
connection), Aha Radio (Bluetooth
connection) and AppRadio Mode
(Android (Bluetooth connection))
Pandora (HDMI connection), Aha
Radio (HDMI connection) and
AppRadio Mode (HDMI connection)
(for AVIC-Z150BH and AVIC-X950BH)
iPod, Pandora (iPhone), Aha Radio
(iPhone) and AppRadio Mode (iPhone)
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 158.
2 Touch [EQ Menu].
3 Touch one of the keys to select a curve
that you want to use as the basis of custo-
mizing.
4 Touch [Customize].
5 Touch the frequency for which you
want to adjust the level.
6 Touch [a] or [b] to adjust the level of
the equalizer band.
Each time you touch [a] or [b], the level of
the equalizer band increases or decreases.
Using the auto-adjusted equalizer
You can set the auto-adjusted equalizer to suit
the vehicle s acoustics. To use this function,
the vehicle s acoustics must be measured in
advance.
= For details of the operations, refer to Adjust-
ing the equalizer curve automatically (Auto
EQ) on page 163.
p To manually adjust the equalizer curve, set
Auto EQ to Off .
Display the "AV Sound Settings"
1
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 158.
2 Touch [EQ Menu].
Touch the key next to "Auto EQ" to
3
turn the auto-adjusted equalizer on or off.
4 Select the equalizer curve.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
p You cannot select [SLA] when the FM tuner
is selected as the AV source.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
Display the "AV Sound Settings"
2
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 158.
Chapter
27
161
En