Using The Bluetooth Audio Player; Starting Procedure; Reading The Screen - Pioneer AVIC-Z150BH Operation Manual

Using the Bluetooth audio player

You can control the Bluetooth audio player.
p Before using the Bluetooth audio player,
you must register and connect the device
to this navigation system.
= For details, refer to Registering your
Bluetooth devices on page 58.
p Operations may vary depending on the
Bluetooth audio player.
p Depending on the Bluetooth audio player
connected to this navigation system, the
available operations with this navigation
system may be limited to the following two
levels:
! A2DP (Advanced Audio Distribution
Profile): Only playing back songs on
your audio player is possible.
! A2DP and AVRCP (Audio/Video Remote
Control Profile): Playing back, pausing,
selecting songs, etc., are possible.
p Since a number of Bluetooth audio players
are available on the market, operations
with your Bluetooth audio player using this
navigation system vary considerably in
range. Please refer to the instruction man-
ual that came with your Bluetooth audio
player as well as this manual while operat-
ing your player on this navigation system.
p While you are listening to songs on your
Bluetooth audio player, please refrain from
operating your cellular phone as much as
possible. If you try operating your cellular
phone, the signal may cause a noise on the
song playback.
p Even if you switch to another source while
listening to a song on your Bluetooth audio
player, the song playback continues.
p Depending on the Bluetooth audio player
you connected to this navigation system,
operations on this navigation system to
control the player may differ from those ex-
plained in this manual.
p When you are talking on a cellular phone
connected to this unit via Bluetooth wire-
less technology, song playback from your
Bluetooth audio player connected to this
unit may be paused.

Starting procedure

1 Pull out the connecting cable for using
the AppRadio Mode.
p You cannot use Bluetooth audio player
when the connecting cable for using the
AppRadio Mode is connected.
p You cannot use a Bluetooth audio player
when App Connection Settings is set to
iPhone , and iPod Connection Settings
is set to Digital AV/VGA (for AVIC-
X850BT and AVIC-X8510BT).
2 Display the AV operation screen.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 76.
3 Touch [Bluetooth Audio] on the left
edge of the screen to display the
"Bluetooth Audio" screen.
p The Bluetooth device is connected when
you touch [Bluetooth Audio]. If the
Bluetooth device is not connected, touch
[Connect].
= For details, refer to Connects and discon-
nects the Bluetooth audio player on
page 123.
4 Use the touch panel keys on the screen
to control the Bluetooth audio player.
= For details, refer to Using the touch panel
keys on page 122.

Reading the screen

2 3 4 5
1
8
1 Source icon
Shows which source has been selected.
Chapter
6
7
121
En
23