Other Functions; Displaying The Image Of Your Application (Iphone With 30-Pin Connector); Displaying The Image Of Your Application (Iphone With Lightning Connector) - Pioneer AVIC-Z150BH Operation Manual

Chapter
26 Using AppRadio Mode
2 Press the VOL (+/–) button.
The sound mix menu will be displayed on-
screen.
1 Sets whether to switch the sound mix
function on or off
! Off (default):
The sound mix function is disabled.
! On:
The sound mix function is enabled.
2 Adjusts the AppRadio Mode volume
Each touch of [+] or [–] increases or de-
creases the volume level.
p When the iPhone is connected by VGA
to use AppRadio Mode, the touch
panel keys for App Volume are not dis-
played on the screen (for AVIC-X850BT
and AVIC-X8510BT).

Other functions

Displaying the image of your
application (iPhone with 30-pin
connector)
You can set an image of the application for
iPhone, which is not compatible with
AppRadio Mode, to be shown on the screen.
p Depending on the type of application, you
may not be able to see the image on
screen.
p You can only control the application on the
connected device.
1 Connect your iPhone.
= For details, refer to Connecting your iPod on
page 18.
2 Press the HOME button to display the
"Top Menu" screen.
138
En
1 2
3 Touch [Apps].
A message, which notifies you that your
iPhone can launch the application, appears
on screen.
A message, which asks you whether you want
to launch your application, appears on your
iPhone.
4 Use your iPhone to refuse to launch the
application.
5 Touch [OK] on the screen of this pro-
duct.
The black screen appears.
6 Launch an application on your iPhone.
An image of the application appears on the
screen.
7 Press the HOME button to return to the
"Top Menu" screen.
Displaying the image of your
application (iPhone with
Lightning connector)
You can set an image of the application for
smartphone, which is not compatible with
AppRadio Mode, to be shown on the screen.
p Depending on the type of application, you
may not be able to see the image on
screen.
p When you use this function, do not connect
other devices via Bluetooth wireless tech-
nology. Be sure to disconnect your
Bluetooth device before using this func-
tion.
p You can only control the application on the
connected device.
1 Connect your iPhone.
p The cable connection method varies de-
pending on your device.
= For details, refer to Connecting your iPod on
page 18.
2 Press the HOME button to display the
"Top Menu" screen.
3 Touch [Apps].
The image in your iPhone appears on the
screen.