Setting A Route To Your Destination; Finding Your Destination By Selecting The Type Of Facility; Searching For Points Of Interest (Poi) - Pioneer AVIC-X1 Operation Manual

Setting a Route to Your Destination

• For safety reasons, these route-setting
functions are not available while your
vehicle is in motion. To enable these func-
tions, you must stop in a safe place and
put on the handbrake before setting your
route.
❒ Some information on traffic regulations by
days or time depends on the time when the
route calculation is performed. Thus, the
information may not correspond with a cer-
tain traffic regulation when your vehicle actu-
ally passes the location. Also, the information
on the traffic regulations provided will be for a
passenger vehicle, and not for a truck/lorry or
other delivery vehicles. Always follow the
actual traffic regulations when driving.
❒ If you press the POS button during route cal-
culation, the calculation is cancelled and the
map display appears.
❒ When the map disc is inserted, the reroute is
done by force. (This rerouting cannot be can-
celled.)
Finding Your Destination by
Selecting the Type of Facility
Information about various facilities (Points Of
Interest - POI), such as petrol stations, amuse-
ment parks or restaurants is available. By select-
ing the category (or entering the POI Name), you
can search for a Point Of Interest.
❒ You can also narrow down the search range
by initially specifying the name of the city or
area where your destination is located.
Searching for Points of Interest
(POI)
1
Touch "Destination" in the Main menu,
and then touch "POI Search".
2
Touch the country key of the destination
country and touch "OK".
➲ Selecting the country where you want to
search ➞ Page 15
3
Touch "Category".
"Name" :
Touch if you wish to first specify the POI
Name.
"City" :
Touch if you wish to first specify the destina-
tion city or area.
4
Touch the desired category.
POI's are divided into several categories.
If the category is not sub-divided into more
detailed categories, the list will not be dis-
played. Proceed to Step 6.
Chapter 3
Category
29