Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2005 C 240 Operator's Manual

Controls in detail
Memory function*
The memory button and memory position
switch are located on the door.
1 Memory button
2 Memory position switch
Switch on ignition ( page 33).
or
Open the respective door.
106

Storing positions into memory

Adjust the seat, steering wheel and
exterior rear view mirrors to the
desired position ( page 35).
Turn memory position switch 2 to the
selected memory position.
Press memory button 1.
Release memory button 1 and press
memory position switch 2 within
three seconds.
All settings are stored to the selected
position.

Recalling positions from memory

!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
Turn memory position switch 2 to the
selected memory position.
Press and hold memory position
switch 2 until the seat, steering wheel
and exterior rear view mirrors have
completely moved to the stored
positions.
i
Releasing the memory position switch
stops movement to the stored
positions immediately.