Mercedes-Benz 2005 C 240 Operator's Manual page 77

Fold up anchorage ring 1.
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 1.
i
For safety, make sure the hook has
attached to the ring beyond the safety
catch, as illustrated.
1 Anchorage ring
2 Hook
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Tighten the top tether strap
according to the child restraint
manufacturer's instructions
Child seat anchors – LATCH-type
This vehicle is equipped with two LATCH-
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installation of a LATCH-type
child seat with the matching mounting
fittings.
Safety and Security
Occupant safety
The foldable LATCH-type anchors are
located between the seat cushion and the
backrest.
1 Anchors
2 Button
Grip inner side of anchors 1 and fold
forward until they audibly lock in place.
Install child seat according to the
manufacturer's instructions.
i
If a child seat is not installed, the
LATCH-type anchors can be folded
back between the seat cushion and the
backrest ( page 76).
75