Advertisement
Left Log Placement
The left log has a hole on the bottom. Place the log so the pin on the burner inserts into the hole on the log
(see photos below). Position the log so the right side straddles the burner holes. The log must not cover any
burner holes.
Right Log Placement
The right log has a hole on the bottom. Place the log so both burner pins insert into the holes on the log (see
photos below). Make sure the log is pushed back so it sits flat.
Page 3 of 6
DVL Ember-Fyre Burner
Installation Instructions
17601695.docx — 11/19/13
(SKU 96900107, 96900109)
© Travis Industries, Inc.
Advertisement
