Canon MG7500 series Online Manual page 715

• If you cannot pull out the paper, open the paper output tray.
4. Attach the transport unit cover.
Insert the transport unit cover to the back of the machine.
5. Attach the rear cover.
Insert the rear cover to the back of the machine.
If you were not able to remove the paper out in step 3:
6. Detach both the cassette 1 and the cassette 2.
7. Pull out the paper slowly.
8. If the paper protrudes from the cassette, remove the paper, then reload it after aligning
the edges of the sheets.
Note
• When reloading the paper, confirm that you are using the paper suited for printing and are
loading it correctly.
9. Attach the cassettes to the machine, then tap OK on the touch screen.
715