Smarttvoke Layout - VocoPro SmartTVOke Owner's Manual

SmartTVOke Layout

1. CH. A/B LEDs - Indicates connection status of each microphone .
2. Status LED - Visually confirms all buttons pressed on each of the microphones .
• The LED will flash once for every button pressed on either microphone .
3. Power Button/Pair ID - Turns receiver OFF/ON .
• This button also toggles the microphone pairing mode .
4. Microphone Out - Provides microphone output only .
5. Optical Input - Accepts digital audio from music sources (PCM only) .
• The SmartTVOke is not compatible with Dolby audio signals .
6. Audio Mixed Out - Provides both microphone and music output .
7. Audio In - Connect a music source that uses the 1/8" audio jack .
8. Power In - Power cord connects here . Any adapter will work if rated at 5V DC .
Front
Rear
11