VocoPro SmartTVOke Owner's Manual page 10

Getting Connected
SENDING THE OUTPUT SIGNAL
TO AN AMPLIFIER
• Connect the 1/8"-to-RCA or 1/8"-to-1/8" cable from
the AUDIO MIXED OUT jack to an available audio input
on the amplifier .
TO A POWERED SPEAKER
• Connect the 1/8"-to-RCA or
1/8"-to-1/8" cable from the AUDIO
MIXED OUT jack into an available
audio input on the powered speaker .
GETTING ONLY MICROPHONE AUDIO
• Connect a 1/4" patch cable (not included)
from the MICROPHONE OUT to an
available Microphone Input jack on either
a mixer or sound system .
Note: Both mic signals will be heard with the
one 1/4" patch connection.
10
Amp
(Amp Not Included)
(Speakers Not Included)
(Mixer Not Included)