Advertisement
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using welder, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this welder.
Keep work area clean. Cluttered areas invite injuries.
Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don't
expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of
flammable gases or liquids.
Keep children away. Children must never be allowed in the work area. Do not let them handle machines,
tools or extension cords.
Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock
up tools and keep them out of the reach of children.
Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use
inappropriate attachments in an attempt to exceed the tool capacity.
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger
industrial tool. There are certain applications for which this welder was designed. Do not modify this
welder and do not use this welder for a purpose for which it was not intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective,
flame retardant, electrically non-conductive cloths and non-skid footwear are recommended when working.
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved,
arc shaded, impact safety face shield (welding helmet). Always
use a full-face shield when welding. Always wear ANSI approved
eyewear under face shield and while in the workplace. Wear a
NIOSH approved dust mask or respirator when working around
metal, chemical dusts, fumes and mists.
Do not over reach. Keep proper footing and balance at all times. Do not reach over or across running
machines.
Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions
for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them
repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at
all times.
Disconnect power. Unplug tool when not in use.
Remove adjusting keys and wrenches. Check that keys and adjustment wrenches are removed from the
welder and work area before plugging in.
Avoid unintentional starting. Be sure the switch is in the off position when not in use and before plugging
in. Do not carry any tool with your finger on the trigger, whether it is plugged in or not.
Stay alert. Watch what you are doing. Use common sense. Do not operate any tool when tired.
MigWeld 140 140 AMP MIG Welder
Page 12 of 27
Hide quick links:
Advertisement
